• Skip to primary navigation
  • Skip to main content

About Corrosion

All about corrosion science and engineering

  • Home
  • Announcements
  • Sections
    • Fundamentals
      • HowTos
      • Electrochemistry
      • Thermodynamics
      • Kinetics
      • Localized corrosion
      • Stress corrosion cracking
      • Cathodic protection
      • Carbon dioxide
    • Physical Metallurgy
    • Low alloy steels
    • Corrosion Resistant Alloys
      • Stainless steels
      • Nickel Alloys
  • Library
    • Lectures
    • Journal Articles
    • Conference Papers
    • Presentations
    • Abstracts
    • Definitions
    • Equations
    • Standards
    • Videos
    • Tables
  • Ref Convert
  • OpenLab!

na718

Anodic polarization curves UNS N07718 (140K) in 3.5% NaCl

November 11, 2017 by Mariano Iannuzzi

This post illustrates three cyclic anodic polarization curves of the precipitation hardening nickel alloy (PHNA) UNS N07718 —with a Specified Minimum Yield Strength of 140 ksi— in 3.5 wt% NaCl (pH 8.0).

Filed Under: OpenLab! Tagged With: anodic polarization, localized corrosion, na718, nickel alloys, polarization curves

Anodic polarization curves UNS N07718 (120K) in 3.5% NaCl

November 10, 2017 by Mariano Iannuzzi

This post illustrates three cyclic anodic polarization curves of the precipitation hardening nickel alloy (PHNA) UNS N07718 —with a Specified Minimum Yield Strength of 120 ksi— in 3.5 wt% NaCl (pH 8.0).

Filed Under: OpenLab! Tagged With: anodic polarization, localized corrosion, na718, nickel alloys, polarization curves

Anodic polarization curves UNS N07718 (mill annealed) in 3.5% NaCl

September 15, 2017 by Mariano Iannuzzi

This post illustrates three cyclic anodic polarization curves of the precipitation hardening nickel alloy (PHNA) UNS N07718 —mill annealed— in 3.5 wt% NaCl (pH 8.0).

Filed Under: OpenLab! Tagged With: anodic polarization, localized corrosion, na718, nickel alloys, polarization curves

UNS N07718 – Heat treatments and mechanical properties

May 7, 2017 by Mariano Iannuzzi

This post summarizes UNS N07718 tensile, impact toughness, and hardness requirements as mandated in API 6ACRA.

Filed Under: Nickel Alloys, Tables Tagged With: hardness, impact toughness, mechanical properties, na718, nickel alloys, tables, uns n07718

UNS N07718 – Chemical composition

May 7, 2017 by Mariano Iannuzzi

This post presents the chemical composition of the precipitation hardenable nickel-based alloy UNS N07718 according to API 6ACRA.

Filed Under: Nickel Alloys, Tables Tagged With: api 6acra, chemical composition, na718, nickel alloys, tables, uns n07718

  • About
  • Contact Me
  • Subscribe
  • Ref Convert

Copyright © 2022 · Mariano Iannuzzi · WordPress · Log in